Leaderboard

Thanks guys. I told her all of you guys advice and she is finding vaping much easier. She has now gone just over 1 month without smoking, so we are both really happy with her progress

Starting a new mod company. Calling it Last Vape.

Stripped, sanded, and polished.

Hell I'm only 42 and forgot about it until someone told me it was happening. I went outside and said "Yup looks darker than it should be." Went in and went back to work. My wife says i need to be more personable to others.....

Regulated mods (ones where you set voltage/wattage/temperature) have a really good track record, but there's also that rare one that has a fault, or one that someone has modified or done something stupid with... Mechanical mods (where you press a button that makes the battery contact and complete a circuit) have a good track record too... IF THEY ARE USED CORRECTLY, and people aren't being stupid... like trying to fire a 0.05 Ohm coil, or using batteries that cannot handle the Amp demands their coil is pulling. Explosions were still uncommon even years ago, before battery technology became better! Like @Tam said, most problems are with cheap Chinese batteries, knock-off batteries, damaged batteries, or where someone pops a battery into their pocket or purse (unprotected) and loose metal manages to make contact between the positive and negative posts, creating a run-away discharge/venting. There's no reason to panic... your mod is 99.9999% safe if used correctly AND you are using a good, reputable battery of the correct Amperage specification for your coil needs. Stick with Samsung, LG, Sony, etc. batteries, and make sure they are at least 20A... and you should be fine for all your vaping needs.

To add to the idiocy -- let's just ignore all the years people have been vaping before this "crisis" came up and we're all healthier than we've ever been... but don't let facts get in your way. SMH

The Independent published this article from a doctor. He is saying what we've known and is actually using common sense. I'm an American doctor. Here's the truth about Juul, vaping and legalizing marijuana https://www.independent.co.uk/voices/juul-ban-flavors-vaping-marijuana-legalize-a9161971.html

I work with a girl who's SO became deathly ill "due to vaping". (When I questioned her, she admitted that it was black market THC her SO was vaping EXCLUSIVELY for a week, when she became ill and then CONTINUED TO VAPE THE STUFF!) Some of the other employees were blasting vaping on the spot because of this person's illness. So I posed the question, "ok, if vaping as a whole is responsible, why am I not ill or dead? I've been vaping for nearly 6 years." The room got totally silent. Then I explained, that I KNOW what's in my juice, because I make my own. What they NEED to be upset about is WHAT this person vaped and WHERE they got it, NOT with vaping as a whole. A few of the employees actually apologized, stating, if they had known that there was black market/tainted juice out there and that could have been the cause of the illness, they would have kept their mouths shut. I just reminded them there is always more to every situation than just what you hear/see on the surface, get the facts before you blow off steam.

The latest CDC report 26 dead and 1200 ill. but then they say only 75% confirmed THC. so, what, the other 25% are liars?...... of course, I'm being facetious, I have no doubt that some of the deaths may have involved vapers with pre-existing health issues and were nowhere near THC. but I wouldn't be surprised if the numbers are fudged here. I just watched a news interview with a couple who's college age daughter got I'll "by vaping" - 5 minutes of the girl's parents professing the innocence of their sweet little girl and when the interviewer pressed further, "oh well, there was that one time when we caught her vaping THC but we believe her that she is not doing it now"......right..... I don't want it to seem like I have no sympathy for these people who are actually suffering from this. I do. It's a terrible tragedy. But the truth will set us free (get ti the bottom if this). Is that too much to ask?

Hey Vapor Talkers, In an effort to keep spammers in check and to ensure new members take a few moments to get acquainted with Vapor Talk's features, all new members will be required to have 3 posts before being placed into the unrestricted 'VT Member" group. How does it work? What limitations will I have when I first join the forum? When first joining the forum you be limited to posting in these sub forums: Introduce Yourself New Vapers Forum Site Features, Requests and Help Vapor Talk Store Support Forum After 3 posts, you will automatically be moved into the standard user or "VT Member" group. From there you can post on the forum normally. But how do I get three posts? What if I don't have a question? What if I want to reply on another topic! The easiest method is to simply introduce yourself (see the Introduction Forum). Say hello! At the very least, a staff member will reply. You're also free to ask a question about your new device in the New Vapers Forum. I can't find the forums you mentioned This is partly why we have this minimal restriction. Take a moment to familiarize yourself with the forum. This ensures you post in the correct area (ensuring your questions or topic is answers faster) whilst easing the workload on our awesome forum admins and moderators. I feel... feel so chained. I just want to ask my question. We know, we get it. But unfortunately, when dealing with a forum of this size, spam can be a real hassle. We're quite good at spotting it and removing it quickly. But this makes it much easier for us to keep spam limited to a single area. It makes clean up easy. We appreciate it. Feel free to start a new topic and jump in. Vapor Talk is well known for it's friendly members, help us keep that vibe going. If you run into any issues, please don't hesitate to contact a staff member.You may also want to take a moment to view the forum rules.

Check this little bugger out! It's about the size of a lipstick tube. 20700 hybrid mech pipe bomb. Great for collecting finger prints.

@Tam and @Walt are correct... Increasing the volume of creamy flavors (Vanilla, Malted Milk, Cream, Ice Cream, etc.) will reduce the "bite" of the fruit flavors. Like Walt, I've found that certain brands of fruit flavors are much harsher than others, and some of the "candy" flavors are very citrus-acidic and artificial tasting (just like Tam said). I also prefer Capella and TFA (The Flavor Apprentice) fruit flavors over others.... CAP are some of the best IMO... I would also suggest lowering the candy flavor (or eliminating it all together) and play with the ratio of Blueberry and malted-milk/ice-cream flavorings until you find the right balance. Mix in 5ml - 10ml batches until you find the ratio you like best... then you can make gallons if it if you wish

My... how squonking has evolved. Once upon a time we used squonkers for direct drip atomizers. Look how far they've come...

Congratulations on your engagement! You can find a nice balance between adulting and still having fun. Enjoy your new apartment for the time you have it all to yourself. Even though I love my SO to pieces, there are times when I miss having my own place.

Ok, I wasn't going to share this but it's too funny not to! This happened a few years ago. The squirrels were causing so much damage I had taken all I could take so I went and bought a couple of live traps. My theory was that I would relocate them to an area that has tons of trees and we would be good. Every day for about 2 weeks I would catch at least one and put it in the back of my truck, drive over to the park and set it loose. After the tally reached in the low 30s a friend said they were probably just coming back. The next one I caught I spray painted the tip of his tail white, relocated him, done deal. The next evening when I got home from work I noticed another squirrel in a trap. Sure enough, he had a white tipped tail!

I have only been 4 days no smoking. But, you have to start somewhere. I'm 58. BUT, I have my 78 year old mom now just starting to get used to vaping on my ipic mini. She likes the juice I made, so here's hoping. Shes been smoking since she was 15!

UPDATE- GOOD TIMES!!! So I revisited the build- cut my wicks just under top of tank level- shorter length probably wick easier to coil- more cotton thru the actual coil and less in channels. Also put an extra loop on my coils as it could easy handle it space wise and changed juice. Not sure what it was- probably mixture of juice (seemed to have no flavour on the dripper too but was tasty as hell few days ago) and cotton clogging up channels but good times ahead!

Same here. Using a smok Al85 Now a 220 watt alien. maybe it's just where I live and work it's mostly the younger crowd using the mods and building coils. We have a store here and every time I'm there I'm the oldest one in the place! Sent using The Vapor Talk mobile app

Yup, folks who do not vape have no interest and have only seen the shock headlines from the coke-a-cola salesmen. Seems like all of the media today use the tactics of the old Enquirer. "Man with three heads found in space ship on Iowa farm!" Something you just have to get used to. Congratulations on your 113 days!!!! One old fart gave me the "Thems bad fer ya!" line. I told him, "I know! To late now. First week of vaping my balls fell off". He went away.

All of the members on the forum could throw recommendations at you, but the only one who can tell you what you like is you. Not that I'm trying to give you a hard time or anything but flavor is so subjective. What one person thinks is perfect, it will taste like dirty socks to the next person. It will all depend on what tastes good to you. One eliquid vendor I liked a lot when I first started out is EC Blends. They have little 5 ml samples for under three dollars (usually something like $1.99 or so). You can customize the juices as much as you like. My all day vape for several years now is an almond joy flavor. I would never have guessed I'd like it this much. Ever. You might surprise yourself with what you find tasty. If you want more throat hit, you'll want a little more PG in your eliquid. This is the flavor carrier, thins the liquid and gives better throat hit. If more vapor, smoother throat hit, a little sweeter, is your thing, then go a little more on the VG. For the set up you have I would recommend going with a 50 PG/50 VG to start. You don't want to go with anything thinner with that tank. Also, at the beginning, go up a little on the nicotine. 3 mg isn't enough for someone trying to get off cigarettes. I'd go at least a 6 mg or 8 mg. If you vape too much and get too much nicotine, yes, you'll develop a headache. Just stop vaping for a little while and it should go away on its own. Make sure to drink lots of water. Vaping dehydrates you so increased water intake is a must -- not soda, not coffee or tea, or anything other than plain water. If the juice tastes a little "bad" when you increase the nicotine, then just have the vendor increase the flavor a little to mask it. Hang in there, we've all been through it. The first few weeks are especially trying because your body is detoxing from all the carcinogens that you took in with cigarettes. If you can hang in there, this will pass.

I recently purchased some SS 420 wire so I could build some TC coils. Being new to this I had no idea what I was buying, all I have bought before was fused Clapton wire. To the internet I went! I tried using a drill to twist some wire, total disaster! I'm sure if I tried again I could do it but it got me thinking. Back in the day when I was racing Motorcycles (Desert) I used to safety were my spokes and had a really cool set of wire twisting plyers... I went to my tool box and there they were! The coil pictured is 3 strands of wire twisted and wrapped 8/7 at 3.5 ID dual coils at 1.7 OHM.

Our friends at Health Cabin sent me a white Kangertech Juppi for review a couple weeks ago, and I think I've used it enough to post up an informed review... Stock photo... I've not taken one with my camera, sorry... First up, I like the size and recessed-tank design. It is very compact and fits nicely in your hand and pocket. The top-fill makes it very easy to keep it topped-off without having to work so hard to remove the whole tank (which isn't difficult, but isn't easy either, if you have large hands). Keeping it's 3ml tank topped-off is a chore... it does burn through juice quite rapidly due to the large cotton area and large coil design, but it does produce great clouds and flavor! The unit takes a single 18650 battery, which is something I do like... for me, it is more convenient to replace a battery quickly, rather than wait for it to recharge, or be tethered to a charging cable while I'm using it. The kit does come with mod, tank, charging cable, and spare o-rings for the tank... but no spare cotton or spare coil.... this is a bad thing in my opinion. Even the top-tanks and older subtank minis came with spare cotton and extra coils. I would think ALL starter-kits should and would come with at least one extra coil and some spare cotton, considering the design requirement of this tank? The coil design is unique as it is just a coil... a long coil in a casing to keep its shape, and you have to wrap a piece of flat cotton (Japanese cotton or cotton-bacon) around it, then slide it into the center tube. The design is simple, but very prone to leaking if you don't get the cotton just right or fully seat the coil unit. I found that out the hard way during the first week :( Another drawback to the design is that it does not like high PG juices, and even 50/50 over-wicks to the point of leaking if you don't use it for a day or two. It's sweet-spot for juice is 60% VG or higher, and works very well with max-VG juices. I've had the unit for 2-weeks, and am on my 3rd piece of cotton, but the coil is holding up very well to my "clear" sweet-tart juice in 40/60 PG/VG. The unit itself is 75W TC, and has settings for Ni, Ti, SS, and TCR in standard temp ranges (200-600F / 100/300C), and seems to work well using a Toptank Nano with Ni or 316L-SS coil. The TCR mode using Kanthal coils is a bit strange... it ramps up slow, then blasts you with warm vapor which is hotter than the temp on the dial, but it is tolerable if you dial it down. Two major nit-picks on the device... ONE, the coil (and paperwork) do not indicate what it is made of, but I was able to determine through trial-and-error and a bit of research, that the included coil is 316-L Stainless Steel, and it works very well on the SS setting for TC. The second gripe is the position of the fire-button (see picture above)... it's on the side of the unit's battery compartment, not the edge! It is also very small and difficult to hold comfortably with large hands. I find myself holding it awkwardly to use my finger or thumb to fire it, or just palming it like squeezing a ball, hoping it fires... it is NOT a great design placement for the button... much like the old MVP 2.0... Overall, I like the design characteristics of the device... small, protected tank, robust TC function, top-fill, unique tank/coil design... but it would not be my first choice for a "starter kit". Price is the biggest drawback, when you can get a 75W Platinum Toptank Mini kit for $20 cheaper... HealthCabin has them listed at $70. Another drawback is the coils... none of my local shops have Juppi coils in-stock, and they are also not available from every online retailer, even ones that sell a Juppi. It is very prone to leaking until you figure out the quirks of wicking (not a beginner skill-set), requires higher VG juices (which not everyone has), and is awkward to hold/use for larger hands. I think this device is better suited for experienced users with smaller hands, and that is proven in the fact that my 5'2" fiance says she has little problems using it So, she will be the primary user of it... just as soon as I finish this bottle of yummy juice

https://www.fda.gov/NewsEvents/Newsroom/PressAnnouncements/ucm568923.htm?utm_source=SFATA+Industry+News+and+Updates&utm_campaign=20fe21d859-EMAIL_CAMPAIGN_2017_07_20&utm_medium=email&utm_term=0_bf36667471-20fe21d859-114819645&mc_cid=20fe21d859&mc_eid=d6009ec24e note date changes

This is actually a great question and one that I'm often asked. There is an easy way to actually visually see the difference between vaping and cigarettes. Grab a smoker and some tissue. Fold the tissue in half, then ask the smoker to blow through the tissue. Ask them to do this three more times. You'll be absolutely shocked at the yellowing left behind on the tissue paper. Now, repeat the process with your e cigarette, do it 5 or even 10 times. You should notice, no stain And if for some reason there was a stain, switch liquids because I've done this test more times than I can count for people and I've never stained tissue with an e-cigarette. On a side note, as british born guy, I'm pretty self conscious about my teeth. (Cavity free my whole life!). When I was a smoker, no matter how hard I tried, I generally suffered from yellowing. These days I'm pretty happy with how white my teeth are. It's been 8 years now and my teeth look great. (And any yellowing that I do have is likely from coffee).

Welcome to vapertalk! Don't have a mage but I like 2x28+32 in my RDA's. I'm looking for flavor though. As far as tricks, I only know one. Vape three times, roll over and take a nap. Love that trick. My wife, not so much.

What to do when that nice new mod starts losing its paint... Strip it and polish it! Sent from a galaxy far far away

Hello everyone. New member. Found you via Phil Busardo.

DAMN! Watch ""Controlled" explosion of a UltraFire 18650 batte…" on YouTube http://youtu.be/ZTzEHsJVZhA

https://www.leafly.com/news/industry/california-vape-maker-kushy-punch-caught-making-illegal-products California vape maker Kushy Punch caught making illegal products On that note, here's an article about one California vape company that's licensed making and selling unlicensed THC product and pushing it out the back door.

When Michigan gets 2.1 billion dollars a year from the master tobacco settlement, sin taxes, and of course campaign donations while cigarette smoking is at it's lowest ever, the mystery becomes pretty clear. Add to that that Michigan issued bonds against anticipated master tobacco agreement income, and is, as always hurting for money. I'm not freaking out but I'm madder than a hornet. I've watched numerous "hearings" and they are paid political propaganda. Cherry picked panel members as well as politicians putting on a B rate movie. Hardly a thread of truth in the entire production. One panelist with a prefix Dr. called the U.K. Royal College of Physicians a couple doctors sitting around making unfounded decisions. The FDA is bumbling around obviously incapable of drafting even final guidelines. The CDC is obviously under pressure to support the political stance on vaping. Our president sites pillow talk as his decision to ban flavors. Insane!! Maniacally Insane!!! Mass media jumps in singing the same song. No wonder, every other commercial is from big pharma who has a vested interest in seeing vaping disappear. Tomorrow I have more nicotine and flavor concentrates coming in. Soon I will be set for the rest of my lifetime. In the big picture that does nothing for the countless people who will go back to analogs, the black market that will fill the void, the people who will never have the opportunity to try vaping. These decisions will kill. Good for the government as the average smoker dies 10 years sooner than the non smoker and will not be collecting social security or medicare. Leave it to the government. This time their taking a health crisis that was created by the black market and driving an industry deeper into that black market. And I'm sure the black market will do a better job of checking I.D.'s.

Everybody who thinks banning flavors is going to end this medical crisis raise your hands! .....yeah, I thought so.

Hey! Hoping everyone is having a good holiday. I'm 5+ years tobacco free and feeling good about that! I never thought I'd ever kick that nasty habit but thanks to vaping I did.

I like the look of that mod.

I got it out it was a piece of rubbery material to support the glass when they're shipping it I believe

I found this one to give very good results https://youtu.be/9QwOcppIfZE

So the point of the salt nic is to deliver high nic without being harsh? If that's the case, then I need to stop thinking I need to try it. About 3 months ago I started cutting 3mg in half. Been trying to reduce my nic intake since March of 2011 when I started vaping.

Holy Crap! You're a machine today. Let's see, I've been up for about an hour and a half and I've stared at the PC monitor a lot. I did build one TC coil and tested a Cylon. I found out it runs about 40°F hot. Also discovered another battery bit the dust. 100% Sag right off the charger. Probably time to replace that one, lol.

Yup, and then you can be like me, living under an overpass in a box. A big box with a lot of mods and atties!!!! Just kidding, @Tam has got it right. Always be prepared!

@Tam nailed it. Nobody can tell you which you will like. It's also a pretty tall order to do a full comparison of the two devices. I suggest you google the two with the word "review" after them and look for video reviews. Three reviewers that I like to watch are DJLSB Vapes, PBusardo, and Mike Vapes. Zophie vapes is pretty good to come to think of it. The rest to me are just salesmen.

250 mil 100mg nic of, 1oz blueberry by loranne,1 oz raspberry by Loranne,1 dram strawberry by loranne,1 oz tart and sour boost by loranne.

Personally if you want to get into that high of a power range I recommend that you learn to build your own coils and use a rebuildable atty. Commercial coils are simply unreliable at high power. They can be pretty "hit and miss".

Hi All, I came across this thread when looking for solution for the LOW RES problem on the NX75/EVO75. I started suffering from it after I had dropped my mod by accident. I'm posting my solution here in the hope that it may help others. In my case, it was a large surface mount chip in the center of the back of the PCB that had come loose on one point. (I'm guessing it's some kind of regulator, it's the biggest package on the board) After soldering it back in place the mod worked like before. You could also wedge it in place by putting a small piece of paper behind it, if you can't solder it. Looking at the size of the solder joint, that chip should not have come loose. I blame bad solder work. You will need a T5 Torx screwdriver to open the modbox. Best of luck.

Bravo! and Welcome! This is the place to draw from the experience of other vapors for sure.

thanks. it was my 12mg of nic plus not brushing my tougne im using 3mg of nic now

I'm on vacation with no easy access to other batteries but the ones in my mod. This worked and was the first link I clicked on, a post from 5 years ago so I created an account to say thanks!!

Take short breaks and have them spirit you away to some dark corner for "band meetings" to talk about the set list or something. Yeah, I can relate all too well. Thankfully, I'm a Navy brat so everyone I went to school with are scattered to the four winds. I've gone out of my way not to have a FB presence/account but some do manage to track me down every now and then. It makes me scratch my head why someone who didn't get along with me suddenly after thirty odd years feels like we're the best of friends now. Ugh indeed.

This little guy greets me every morning. He has his own dish on the deck and when it's out of peanuts he comes to the door like this. [emoji41]

I would much rather be green. Kinda a Grinch green if possible? I don't have a purse that goes with purple. Or heals either.

Alcohol is frequently found in flavorings, so it is not uncommon to find eliquids that have alcohol listed as an ingredient. Alcohol doesn't dry out your lungs... it burns-off quickly and doesn't hurt anything. I frequently soak a coil in Everclear (pure-grain 150-proof) alcohol to get the flavor of a bad juice out of a new-ish coil so I can use another flavor. If the alcohol hadn't completely dried (evaporated) by the time I use it, it will give the new juice a "flat" flavor for the first few puffs, but hasn't given any ill effects. PG is Hygroscopic (absorbs/attracts water), and is therefore a humectant (used to keep things moist). PG will readily absorb moisture in your body (lungs) and gives you a dry mouth/throat feeling. This is why vapers should drink plenty of WATER to combat PG robbing you of moisture as you exhale. Alcohol in eliquid (which is usually very small amounts, like 1%) does not cause this problem, compared to the much higher concentrations of PG (ranging from 10-80% of the total volume of the liquid).

I'm surprised that I haven't seen any posts on the VOOPOO DRAG. It's a great performing dual 18650 Mod. Very accurate and well built. Response time (push of fire button to full power) is amazing. Max Wattage is 157 Watts and TC is accurate too. I have one and I really like it. Cheers Sent from my iPhone using Tapatalk