Hello everyone. I’m new to this world. I’m using the 220w Alien with a baby beast atomizer. The batteries I’ve bought and most of the ones I’ve seen say 3.7 V. When I vape at the low end wattage (50w) for the .4 OHM coil my voltage is 4.619. If I drop it to 30w then I get a reading of 3.593 volts. I’m assuming the batteries say 3.7 to indicate the safe level. By using the suggested watts for the coil I’m going above that. But when looking for different batteries I noticed most are 3.7. Leading me to think that this is okay. But I don’t want to use it dangerously. Help.

I have been using them just fine. Suddenly, my Kangertech Dropbox 160 says check battery. Screen is going wacky and mod shuts down. Hours later it worked perfect, then randomly went back to the error and shutting down.

I swapped battery positions and it works again like normal...

Are these safe to use?

I'm worried about the white ring insulator being a little gnawed on. Also, one is a flattop and one isn't. Is this an issue of safety?

Sent from my LGLS775 using Tapatalk

I've been using LG HE2 18650 2500mAh 20A 3.7v Rechargeables. in my eleaf 60W and my eleaf Pico since May. Should they be wearing out already? I charge them in a Nitecore 2 slot battery charger never in the mod. I alternate them one charging one in use. How often should I be buying new batteries? I was thinking about getting the brown LG's next or should I be looking at something else?

Thanks for any input...

Edna

salve, da appassionato di box meccaniche e di svapo da ormai 3/4 mesi, sono alla disperata ricerca di una buona mod con tubo meccanico, non per forza deve essere un kit, anche un tubo e un atom a parte, l'importante è che non siano cloni ma solo mod originali. Il budget massimo è di circa 120€ quindi abbastanza ristretto, ma non posso farci nulla [emoji28] avevo pensato tubo karma e atom peerless e starei apposto con la metà del mio budget, ma preferirei qualcosa qualitativamente superiore. Quale mi consigliereste?

Inviato dal mio iPhone utilizzando Tapatalk

Hi guys my battery was empty so i walk to the table while i screw my tank of the battery and the battery slips out of my hand right into my gf's glass of water that was standing on the table. The battery is a regulated one, the cuboid mini. The battery was empty when it fell in the water, do you guys think i can let it dry and still use it? Do i need to be affraid of corrosion or so? Exploding? Looking forward to your answers thanks guys

Sent from my SM-G935F using The Vapor Talk mobile app

Am I pretty much safe, assuming their batteries are not fakes, etc. and my builds are between .2-.8 ohms on my mods?  I generally don't vape more than 55 watts, unless I put together a .2-.3 dual build, then I'll take it up to 90 watts or so.

HELP!

I got a Releaux 2/3 and have 3 pairs of married batteries for it. (which I'm rotating in the 2 battery mode) They're Sony VTC5 IMR 18650 2600 mAh 3.7V and they seem too fat for the mod and they don't last very long I'm vaping at about 35W with a 0.41 build in my Avocado 25mm RDTA. Everything ie...mod/batteries are  brand new (except the tank).  I charge all my batteries in an external nitecore charger. The battery percentage drops really quickly for some reason. I've vaped this same build on a single battery mod and it's lasted a day and a half but this is only lasting about 8 hours. It's weird because the batteries seem fatter (wider) than my others too and It's hard to close the door on my mod....

Is this normal?

Thanks.

http://petapixel.com/2016/11/23/future-camera-batteries-might-charge-seconds-last-days/

Not very clued up with batteries so thought I should seek advice from the more experienced. . . .

So which batteries are going to be best for this mod combined with Aspire Atlansis v2 running either 0.3 or 1.8 equally.

Thinking I need a general all rounder?

:/

Cheers

Sent from my SM-G930F using Tapatalk

I just got my Kanger Subox Mini and now i need some batteries. 

What is the BEST 18650 battery to compliment my Subox mini? 

Ive seen batteries with higher mAh cost less than batteries with lower mAh and im confused as to why. Could someone explain?

This is my first box mod, so im a newbie. Thanks for all and any replies!

The price isn't an issue either. I just want the best battery available so that it doesn't die it the middle of the day and it keeps consistent performance throughout the battery life.  

If so, what setting should I use, and what reading am I looking for?

It, like all basic ones, only has a 1.5v and 9v setting on the dial.

I've been experimenting with different builds on my new dripbox 160 which shows the voltage I'm drawing. A few of the builds that require a higher wattage of course draws higher voltage, and I end up ripping the coils out and trying something else because I'm not sure if it's safe.

Hopefully what I asked makes sense, and isn't too stupid.

Sent from my VF-895N using Tapatalk

Here is a few links that have details:

Can you identify the fake LG HG2 18650 Battery?

LG HG2 with gloss finish insulator

Counterfeit/Low Grade LG HG2 Test Results

Mooch suggests, and I agree that the 30Q would probably be a smarter purchase until they get this straightened out.  I have noticed a big "LG Blowout" from some vendors, and I suspect it is to clear their inventory of any of these batteries, if they actually have any of the Low Grade/Counterfeit batteries.