Jump to content

igotit

VT Member
  • Posts

    46
  • Joined

  • Last visited

Profile Information

  • Location
    louisiana
  • Interests
    astronomy

igotit's Achievements

Newbie

Newbie (1/14)

6

Reputation

  1. igotit

    OBS Engine?

    3 days on the engine.....no regrets,no leaks,no issues. this morning i installed the twisted coils that were included....waste of time.i tried upto 70 watts,nothing but poping and some flooding. flavor was better with twisted,but wasnt worth the effort. my friend has the engine mini,always complains about flooding due to the oblong wicking holes on the mini.
  2. igotit

    OBS Engine?

    I just got the engine 5.2 ml. i love it,i give it 5 stars easily. the top airflow offers cooling that actually keeps my coils cooler.....so it takes alot longer before she gunks up. i run her ontop my smok alien 220 ,running 26g at 9 wraps to .36 ohms. my battery last longer,not sure if the cooling affect helps,but i do know whith anything electrical that draws amps.....heat is the enemy causing more amp draw. i draw 9 amps from batts on this tank. my griffen with same coils starts off at 9 amp draw,after a few vapes goes upto 13 amps. im in love with my new engine and alien combo. pictured next to my other setup cuboid 200 with tobeco 25mm super. 25 super is a nice budget rta %5BURL=http://s743.photobucket.com/user/sevenr341/media/Mobile%20Uploads/9BF07258-1C63-4575-8A98-28AA2C5102DA_zpsx8egnow4.jpg.html%5D%5BIMG%5Dhttp://i743.photobucket.com/albums/xx80/sevenr341/Mobile%20Uploads/9BF07258-1C63-4575-8A98-28AA2C5102DA_zpsx8egnow4.jpg%5B/IMG%5D%5B/URL%5D
  3. 13.5 w,4v,1.9 ohm nautilus mini. 50/50 blend 0mg nic....simply amazing for $60 tank/mod investment Watch "Eleaf istick 20w" on YouTube Eleaf istick 20w:
  4. I have the ehpro kayfun (fill and air screws on the bottom,side intake ports) I use 100% cotton for wicks,no leakage. evey now and then ill get gurgle or 2. I leave my kfl plus on its side a lot.
  5. I can see it being a leaker every now and then.the coils are pretty low on the deck.....with that said....id still buy it! lookin forward to your updates.
  6. just took a wrap off,dropped down to 0.75 ohm.its a pain to wick.flavor tasted better on 0.86 ohms,more cloud aswell. heres some better pics
  7. my design allows a bigger coil in the kfl,as we all know the kfl is limited on coil space,my coil is very tall and fits nicely in the kfl wraping around something flat gives the coil a twist ....like a dna strand. test pic
  8. for some reason I cant post pics,but heres a design I been playin with.im having great results. instead of a round wrapped coil I been playin with other shapes. right now im burning a .8 ohm 24g 7 wraps.i used a flat piece of stainless to wrap around.3/16 wide by 0.050 thick flat bar.the coil is basically a tall rectangle.this gives more surface contact between the coil and wick. I have it installed in my stock kfl plus.even with limited airflow.....she really chucks out a cloud on my panzer......plenty flavor. I made a macro coil .7 ohm 24g ,my new rectangle design out performs it in clouds and flavor on the kfl/panzer clone. not sure if this design has been tried or named yet.im gonna try dual setup on my tugboat and compare it to a round coil build soon. more surface area equals more vape and flavor......now I gotta get more air in the kfl. imagine combining this with a Clapton design wire. another idea is a cotter pin,wrap around 1 half.....gives you a D shaped coil. thanx
  9. I mostly meant ....I think aspire should only include the atlantis with there own mod to help avoid improper use,along with a warning about sub ohming. asfar as coil hit or miss....im referring to kanger mostly.i went through 4 5 pack.....out of all those coils,i ended up with 7 coils that burned longer than 4 days.most were shorted out,assembled wrong and wouldn't install properly.ive only used a few aspire coil,sofar they were all decent.a few only lasted 2 days,some lasted 2 weeks.
  10. heres what im going to say....for a manufactured coil burner....the cloud produced by the atlantis is impressive. I think this tank should only be sold with a mod that can handle the load of sub ohming.that way aspire can backup and be held liable in court if anything went wrong.so many dangers involved with sub ohm. after saying all that....I steer clear of manufactured,unpredictable coils.coil quality is hit or miss. if someone wants to sub ohm.....it should be as it is now,research,learn,buy,build. safety is key and our responsibility. from a marketing pov...aspire will sell a ton of these.
  11. looking forward to a review....looks like a better...badder kay fun to me. I have the kayfun....it is a tight draw that restricts airflow....which restricts the vape cloud.
  12. im gonna go try a few vape mixes at a friends tomorrow,hes kinda like a vape junkie....lol. I was thinking of trying a 70 30 blen next.im not really after throat hit,i like clouds and flavor. I just used the panzer for about 1 hour....I love this setup. my current dual 0.34 ohm coils don't heat the battery after 1 hour.i kept checking it every refill,we all hear horror stories of people over loading batts. I know the dangers of lipo cells from my rc hobby. when I use my elvt/kayfun.....im like....that's it? leaves me wanting more.....and the elvt and kayfun is a good combe for someone wanting something more than an evod.....and a way to get into coil building. thanx for the info.ill try to figure out how to upload my pics.....unless theres a post count limit holding me back. I also drilled my air holes to 0.105 ths,and chamfered the holes with a 1/8 bit.more air,cool draw without the whistle now.
  13. went to ebay and picked up a panzer clone,tugboat ,coil jig,100ft of kanthol 24g and a vtc4 battery for $75 shipped. this is my first time with a mech mod/dripper. and im impressed. I built 2 coils 24g 7 wraps around 1/8th bar,ohmed out 0.34 after a brief burn in. im currently burning salty dog perfect melon 50/50 mix 3mg nic. the tugboat has a deep well bay,once filled I can get 6 man sized vapes before having to refill of the tug and the heat starts going up. good flavor and throat hit. im sure I didnt build everything just right....im new to building coils and setups. im sure with the right juice,this is a bad lil cloud chaser. for some reason I cant paste my photobucket img code for the image.
  14. thanx Jason,i think I understand what your sayin.ill read up alittle.
  15. you guys will be happy to know....I found my minimium comfort zone with the elvt. I now run a kay fun lite plus,1.7 ohm coil,4.5 volts,11.5 watts burning 3mg 50/50 juice.
×
×
  • Create New...

Important Information

Terms of Use Privacy Policy Guidelines